Product Description
NMRV Worm Gearbox Self-locking Gearbox Servo Stepper Motor Gearboxchine
Features
1. Light in weight and non-rusting
2. Smooth in running, can work a long time in dreadful conditions
3. High efficiency, low noise
4. Good-looking in appearance, durable in service life, and small in volume
Related Products
Product Description
Model | 571 ~ 150 |
Power | 0.06kw ~ 15kw |
Input speed | 750rpm ~ 2000rpm |
Reduction ratio | 1/5 ~ 1/100 |
Input motor | AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo |
Output shaft | Solid shaft / Hollow shaft / Output flange… |
Dimension standard | Metric size / Inch size |
Material of housing | die-cast aluminum / Cast iron / Stainless steel |
Accessories | Flange / CHINAMFG shaft / Torque arm / Cover … |
FAQ
Q: Can you make the gearbox with customization?
A: Yes, we can customize as promised, like flange, shaft, configuration, material, etc.
Q: Do you provide samples?
A: Yes. The sample is available for testing.
Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.
Q: What's your lead time?
A: Standard products need 5-30days, a bit longer for customized products.
Q: Do you provide technical support?
A: Yes. Our company has design and development team, we can provide technical support if you
need.
Q: How to ship to us?
A: It is available by air, sea, or train.
Q: How to pay the money?
A: T/T and L/C are preferred, with a different currency, including USD, EUR, RMB, etc.
Q: How can I know if the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send an inquiry directly, and we will respond within 24 hours.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machinery |
---|---|
Function: | Change Drive Torque, Speed Reduction |
Layout: | Right Angle |
Samples: |
US$ 50/Piece
1 Piece(Min.Order) | Order Sample Aluminum/Cast Iron
|
---|
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Troubleshooting Abnormal Noises in an NMRV Gearbox
Abnormal noises from an NMRV gearbox can be troublesome and might indicate underlying issues. Follow these steps to troubleshoot and resolve the problem:
- Identify the Noise: Listen closely to the noise and determine if it's a grinding, whining, or knocking sound.
- Check Lubrication: Insufficient or contaminated lubrication can lead to noises. Ensure the gearbox is properly lubricated.
- Inspect Gears: Examine the gear teeth for wear, damage, or misalignment.
- Look for Foreign Objects: Foreign objects inside the gearbox can cause noise. Clean and inspect the interior.
- Check Bearings: Worn or damaged bearings can be noisy. Inspect and replace them if necessary.
- Inspect Seals: Damaged seals can allow contaminants in, affecting performance. Replace damaged seals.
- Examine Housing: Ensure the gearbox housing is intact without cracks or misalignment.
- Review Load Conditions: Excessive loads can lead to noise. Ensure the gearbox isn't overloaded.
- Check Mounting: Confirm the gearbox is properly mounted and aligned.
- Consult Guidelines: Refer to manufacturer guidelines for specific troubleshooting steps.
- Professional Help: If the issue persists, seek help from a professional technician or manufacturer.
Follow these steps to identify and rectify abnormal noises in your NMRV gearbox.
Lifespan of an NMRV Gearbox
The lifespan of an NMRV (worm gear) gearbox can vary based on several factors, including the quality of manufacturing, proper maintenance practices, operating conditions, and the specific application it is used for. However, when designed, manufactured, and maintained properly, NMRV gearboxes can have a long and reliable service life.
High-quality NMRV gearboxes that are made from durable materials, precisely machined, and assembled with care tend to have a longer lifespan. Regular maintenance, including proper lubrication, inspection, and addressing any signs of wear or damage, can significantly extend the gearbox's operational life.
The operating conditions in which the gearbox is used also play a role in determining its lifespan. Factors such as load, temperature, speed, and environment can impact the wear and tear on the gearbox components.
It's important to follow the manufacturer's recommendations for maintenance intervals and procedures to ensure optimal performance and longevity of the NMRV gearbox. By adhering to these guidelines and addressing any issues promptly, users can expect an NMRV gearbox to provide reliable service for many years.
Installing an NMRV Gearbox
Installing an NMRV gearbox requires careful attention to ensure proper alignment and secure attachment. Here's a general guide to the installation process:
- Prepare the Workspace: Ensure you have a clean and organized workspace with the necessary tools and equipment.
- Positioning: Place the NMRV gearbox in the desired position on your machinery, making sure it aligns with the input and output components.
- Alignment: Ensure that the input shaft of the gearbox is aligned with the driving shaft from the power source. Misalignment can lead to premature wear and reduced efficiency.
- Mounting: Securely mount the NMRV gearbox to the machinery frame using appropriate fasteners. Follow the manufacturer's recommendations for torque specifications.
- Input Coupling: Connect the input shaft of the gearbox to the driving shaft using a suitable coupling. This coupling should be properly aligned to avoid unnecessary stress on the gearbox components.
- Output Coupling: Similarly, connect the output shaft of the gearbox to the driven component using an appropriate coupling.
- Lubrication: Before operation, make sure to fill the gearbox with the recommended lubricant to ensure proper gear meshing and reduce friction.
- Testing: Run the machinery briefly to check for any unusual noises, vibrations, or leaks. Make any necessary adjustments.
It's crucial to follow the manufacturer's installation guidelines and specifications to ensure a smooth and trouble-free installation process. Proper installation contributes to the longevity and reliable performance of your NMRV gearbox.
editor by CX 2024-03-27
China Professional Factory Gear Box Gpb CZPT Servo Motor Gearhead High Precision Planetary Gearbox for Woodworking Machinery combined worm gearbox
Product Description
TaiBang Motor Industry Group Co., Ltd.
The main products is induction motor, reversible motor, DC brush gear motor, DC brushless gear motor, CH/CV big gear motors, Planetary gear motor ,Worm gear motor etc, which used widely in various fields of manufacturing pipelining, transportation, food, medicine, printing, fabric, packing, office, apparatus, entertainment etc, and is the preferred and matched product for automatic machine.
Model Instruction
GB090-10-P2
GB | 090 | 571 | P2 |
Reducer Series Code | External Diameter | Reduction Ratio | Reducer Backlash |
GB:High Precision Square Flange Output
GBR:High Precision Right Angle Square Flange Output GE:High Precision Round Flange Output GER:High Precision Right Round Flange Output |
050:ø50mm 070:ø70mm 090:ø90mm 120:ø120mm 155:ø155mm 205:ø205mm 235:ø235mm 042:42x42mm 060:60x60mm 090:90x90mm 115:115x115mm 142:142x142mm 180:180x180mm 220:220x220mm |
571 means 1:10 | P0:High Precision Backlash
P1:Precison Backlash P2:Standard Backlash |
Main Technical Performance
Item | Number of stage | Reduction Ratio | GB042 | GB060 | GB060A | GB090 | GB090A | GB115 | GB142 | GB180 | GB220 |
Rotary Inertia | 1 | 3 | 0.03 | 0.16 | 0.61 | 3.25 | 9.21 | 28.98 | 69.61 | ||
4 | 0.03 | 0.14 | 0.48 | 2.74 | 7.54 | 23.67 | 54.37 | ||||
5 | 0.03 | 0.13 | 0.47 | 2.71 | 7.42 | 23.29 | 53.27 | ||||
6 | 0.03 | 0.13 | 0.45 | 2.65 | 7.25 | 22.75 | 51.72 | ||||
7 | 0.03 | 0.13 | 0.45 | 2.62 | 7.14 | 22.48 | 50.97 | ||||
8 | 0.03 | 0.13 | 0.44 | 2.58 | 7.07 | 22.59 | 50.84 | ||||
9 | 0.03 | 0.13 | 0.44 | 2.57 | 7.04 | 22.53 | 50.63 | ||||
10 | 0.03 | 0.13 | 0.44 | 2.57 | 7.03 | 22.51 | 50.56 | ||||
2 | 15 | 0.03 | 0.03 | 0.13 | 0.13 | 0.47 | 0.47 | 2.71 | 7.42 | 23.29 | |
20 | 0.03 | 0.03 | 0.13 | 0.13 | 0.47 | 0.47 | 2.71 | 7.42 | 23.29 | ||
25 | 0.03 | 0.03 | 0.13 | 0.13 | 0.47 | 0.47 | 2.71 | 7.42 | 23.29 | ||
30 | 0.03 | 0.03 | 0.13 | 0.13 | 0.47 | 0.47 | 2.71 | 7.42 | 23.29 | ||
35 | 0.03 | 0.03 | 0.13 | 0.13 | 0.47 | 0.47 | 2.71 | 7.42 | 23.29 | ||
40 | 0.03 | 0.03 | 0.13 | 0.13 | 0.47 | 0.47 | 2.71 | 7.42 | 23.29 | ||
45 | 0.03 | 0.03 | 0.13 | 0.13 | 0.47 | 0.47 | 2.71 | 7.42 | 23.29 | ||
50 | 0.03 | 0.03 | 0.13 | 0.13 | 0.44 | 0.44 | 2.57 | 7.03 | 22.51 | ||
60 | 0.03 | 0.03 | 0.13 | 0.13 | 0.44 | 0.44 | 2.57 | 7.03 | 22.51 | ||
70 | 0.03 | 0.03 | 0.13 | 0.13 | 0.44 | 0.44 | 2.57 | 7.03 | 22.51 | ||
80 | 0.03 | 0.03 | 0.13 | 0.13 | 0.44 | 0.44 | 2.57 | 7.03 | 22.51 | ||
90 | 0.03 | 0.03 | 0.13 | 0.13 | 0.44 | 0.44 | 2.57 | 7.03 | 22.51 | ||
100 | 0.03 | 0.03 | 0.13 | 0.13 | 0.44 | 0.44 | 2.57 | 7.03 | 22.51 |
Item | Number of stage | GB042 | GB060 | GB060A | GB90 | GB090A | GB115 | GB142 | GB180 | GB220 | |
Backlash(arcmin) | High Precision P0 | 1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | |||
2 | ≤3 | ≤3 | ≤3 | ≤3 | |||||||
Precision P1 | 1 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | |
2 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ||
Standard P2 | 1 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | ≤5 | |
2 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ≤7 | ||
Torsional Rigidity(N.M/arcmin) | 1 | 3 | 7 | 7 | 14 | 14 | 25 | 50 | 145 | 225 | |
2 | 3 | 7 | 7 | 14 | 14 | 25 | 50 | 145 | 225 | ||
Noise(dB) | 1,2 | ≤56 | ≤58 | ≤58 | ≤60 | ≤60 | ≤63 | ≤65 | ≤67 | ≤70 | |
Rated input speed(rpm) | 1,2 | 5000 | 5000 | 5000 | 4000 | 4000 | 4000 | 3000 | 3000 | 2000 | |
Max input speed(rpm) | 1,2 | 10000 | 10000 | 10000 | 8000 | 8000 | 8000 | 6000 | 6000 | 4000 |
Noise test standard:Distance 1m,no load.Measured with an input speed 3000rpm
Application: | Machinery, Agricultural Machinery |
---|---|
Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Reduction |
Layout: | Cycloidal |
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Step: | Double-Step |
Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
|
|
---|
What is a worm gear reducer gearbox?
A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.
Hollow shaft worm gear reducer gearbox
The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.
Double throat worm gear
Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.
Self-locking function
One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.
Heat generated by worm gears
Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.
Size of worm gear reducer gearbox
Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.
editor by CX 2023-06-13
in Casablanca Morocco sales price shop near me near me shop factory supplier 1660 CNC Router Machine Wisdom Yaskawa Servo Motor manufacturer best Cost Custom Cheap wholesaler
Our company pays certain focus to customers' wants, listening to the distinct specifications of each consumer and guaranteeing complete gratification. If you require any data or samples, please contact us and you will have our soon reply. our products are promoting well in the American, European, South American and Asian markets.
For the stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd plate 1224, our UD481 1325 CNC router can be explained as the top configuration. The Italian HSD spindle is geared up with the Japanese Yaskawa servo motor to tremendously enhance the machining precision and processing velocity. For the mass generation of sound wooden household furniture and harEPTTmaterials, UD481 1325 CNC router is a EPTTful assistant.
EPTT specification: | |||||
X-Y-Z aXiHu (West EPT) Dis.s working location | one,three hundred x two,five hundred x200mm | ||||
EPTT dimensions | one,900 x 3,200x2200mm | ||||
Repositioning resolution | .02mm | ||||
X-Y movement | rack and pinion, EPT EPT | ||||
Z motion | ball screw EPT/EPTTiwan | ||||
XiHu (West EPT) Dis.hu (West EPT) Dis. | EPT cent20 square/EPTTiwan | ||||
Max. velocity | 45,000mm/min | ||||
Max. slicing velocity | 35,000mm/min | ||||
Spindle EPTT | 9.6KW HSD air cooling -EPTT | ||||
Car device changer | linear variety with device chank | ||||
Spindle speed | 24,000rpm | ||||
Inverter EPTT | 11kw Inovance | ||||
Drive motors | YASKAWA servo motor | ||||
Doing work voltage | AC380V/50-60Hz, three-section | ||||
Command code | G code | ||||
Personal computer interface | USB 2. | ||||
EPTTble | EPT table with 4kw pump | ||||
application totally free | Alphacam | ||||
controller | syntec 6MA | ||||
pop up pins | x aXiHu (West EPT) Dis.s | ||||
y aXiHu (West EPT) Dis.s |
EPTT Detail:
We will offer a practical toolbox with the EPTT. In the toolbox we have geared up some frequent add-ons, this sort of as EPTs wrenches, uncooked EPTTs, U disk, and we also prepared some fundamental varieties of router bits ,Each type of bit has aspecific application for use.
in Bishkek Kyrgyzstan sales price shop near me near me shop factory supplier Nidec-Shimpo Able Vrsf-10c-750-Lm Planetary Gear Speed Reducer for CNC Machine Accessories Servo Motor manufacturer best Cost Custom Cheap wholesaler
We supply OEM provider. Our AdvantagesProducts Huge volume in Stock, No MOQ required We comply with all the international standards, this kind of as ISO9001 and TS16949 standards. Possessing accumulated valuable encounter in cooperating with foreign buyers,
Nidec-Shimpo Able VRSF-10C-750-LM EPTT
The precision of Nidec EPTT is higher than that of common EPTT inside of 6 arc minutes, and the security is also high. The main framework is the planetary EPT. The planetary EPT is utilised to obtain the effect of EPTT splitting and multi-tooth meshing. It has large rigidity, large precision, large EPTT effectiveness, substantial torque/tiny volume.
EPTT identify | Nidec EPTT |
Model identify | Nidec |
Usage | For CNC EPTT, EPTT, automotive, and so on. |
Tooth floor | EPTcal EPT |
EPTT | Foam with carton box |
Shipping and delivery time | 5-ten daEPTTafter orEPTTconfirmation |
Payment expression | T/T, L/C, Western EPT |
Enterprise type | EPT, trading |
Major products | Laser Chopping EPTT, Laser EPT EPTT, Laser Cleaning EPTT, Chopping EPT, Laser, Collimating Lens, Concentrating Lens, Nozzles, Ceramic Rings, Protective EPTs/ Lens |
Aurora Laser is a EPTT manufacturer and trading company for laser reducing EPTT and related spare areas.
we alwaEPTTsupply laser products with consumables at very competitive value and superb support. Our products have quite great suggestions from our clientele.
Our items handles different kinds like laser chopping/welding/marking/engraving EPTTs, serving for manufacturers like Trumpf, Han's, Amada, Bystronic, Precitec, RayTools, CHUTIAN, WSX, EPTyag, Lasermech, Cypcut, and many others.
We received really specialist engineers staff who will offer you you equally online and door to door support anytime.
FAQ
Q 1. Are you a factory or a investing company?
one. We are a producer with our trading organization.
two. We create our personal spare parts, we also distribute EPTTs from other makes.
three. Apart from, we have superb engineers staff who can supply fix, put in and change EPTTs for you and your clients.
Q 2. How do you manage your good quality?
one. Generation method stXiHu (West EPT) Dis.Hu (West EPT) Dis.rdization, process stXiHu (West EPT) Dis.Hu (West EPT) Dis.rdization, refinement.
two. one hundred% Concluded Product Screening.
3. The 3rd social gathering solution inspections are acceptable.
4. Inspection prior to loading.
Q 3. What are your rewards when compared with other people?
one. Centered on rigging considering that 2007, Wealthy experience in this area.
two. The same good quality solution, the ideal price tag.
three. Well timed Shipping with the assistance of 800 sq. meters warehouse.
4. Be Good at Personalized-Manufactured EPT.
5. Above twenty Skilled Employees in EPT Group, assist you enEPTT fret-free of charge and effective communication.
in Beirut Lebanon sales price shop near me near me shop factory supplier Atg High Stability Helical Gear Planetary Reducer for Servo Motor manufacturer best Cost Custom Cheap wholesaler
a specialised provider of a full variety of chains, sprockets, gears, gear racks, V-belts, couplings and reducers. Our business pays particular consideration to customers' requirements, listening to the distinct requirements of each and every client and guaranteeing total pleasure. It has proven steady cooperation with a lot of nicely acknowledged universities and institutes in china these kinds of as, Zhejiang College, Jilin University, Complex committee of national chain drive normal, Institute of nationwide chain generate, Zhejiang software engineering materials institute, Huhan materials safety institute and it cooperated to identified China Very first Automobile chain institute with Countrywide chain generate institute. PGH SERERS
Merchandise Functions:
(one) Minimal Sounds:UnEPTT65db.
(2) Low Backlash:Backlash is unEPTT3 arcmin . Backlash for 2-phase pace reduction is with in 5 arcmin.
(three) High Effectiveness:1-stage up to 95% or much more,2-stage up to ninety two% or a lot more.
(4) High Enter Pace:Enter pace makes it possible for for up to 8000RPM.
(five) Large Torque:Large torque output than that of typical planetary EPTT EPTTs
(6) Upkeep-Free of charge:Low grease wear,can be lifetime lubrication
(7) Substantial Pace Reduction Ratio:Velocity ratio is more than one/a thousand.
Gain:
Use:
- Aerospace,military industry.
- Healthcare health,electronic info market.
- Industry robots,Creation EPTT,CNC EPTT tool manufacturing industry.
- EPTT,Textile,EPTT,Meals,EPTTlurgical.
- EPTT protection engineering,Warehouse EPTT market.
Model ILLUMINATE:
Equipment BOX Performance Data:
MODUL NO. | Stage | RATIO sup1 | PGH42 | PGH60 | PGH90 | PGH115 | PGH142 | PGH180 | PGH220 | |
Rated output torque T2N | Nm | 1 | 3 | twenty | fifty five | one hundred thirty | 208 | 342 | 588 | 1,one hundred forty |
four | 19 | 50 | a hundred and forty | 290 | 542 | one,050 | one,seven-hundred | |||
5 | 22 | sixty | one hundred sixty | 330 | 650 | 1,two hundred | two,000 | |||
six | twenty | 55 | 150 | 310 | 600 | one,one hundred | 1,900 | |||
7 | 19 | 35 | 140 | three hundred | 550 | one,a hundred | one,800 | |||
eight | 17 | 37 | 120 | 260 | 500 | 1,000 | one,600 | |||
ten | 14 | fifty five | 95 | 220 | 370 | 800 | 1,220 | |||
2 | twelve | twenty | 55 | one hundred thirty | 208 | 342 | 588 | 1,a hundred and forty | ||
fifteen | 20 | 50 | a hundred thirty | 208 | 342 | 588 | one,one hundred forty | |||
20 | 19 | 60 | one hundred forty | 290 | 542 | 1,050 | one,seven-hundred | |||
twenty five | 22 | 60 | 160 | 330 | 650 | 1,two hundred | 2,000 | |||
30 | 22 | 60 | a hundred and sixty | 330 | 650 | 1,two hundred | 2,000 | |||
35 | 22 | sixty | one hundred sixty | 330 | 650 | 1,two hundred | two,000 | |||
40 | 22 | 60 | a hundred and sixty | 330 | 650 | 1,200 | 2,000 | |||
fifty | 22 | sixty | 160 | 330 | 650 | 1,200 | 2,000 | |||
sixty | 20 | fifty five | a hundred and fifty | 310 | 600 | one,100 | 1,900 | |||
70 | 19 | 35 | 140 | three hundred | fifty | 1,one hundred | one,800 | |||
80 | 17 | 35 | one hundred twenty | 260 | 500 | 1,000 | one,600 | |||
one hundred | fourteen | 37 | ninety five | 220 | 370 | 800 | one,220 | |||
MAX. output torqueT2B | Nm | one,two | three~100 | three occasions of Nominal Output Torque | ||||||
Rated enter pace n1 | rpm | one,2 | three~100 | 5,000 | five,000 | 4,000 | 4,000 | 3,000 | three,000 | two,000 |
MAX.enter pace n1B | rpm | 1,2 | 3~a hundred | ten,000 | 10,000 | 8,000 | 8,000 | six,000 | six,000 | four,000 |
Micro Backlash P0 | arcmin | 1 | three~ten | - | - | le1 | le1 | le1 | le1 | le1 |
two | twelve~a hundred | - | - | - | le3 | le3 | le3 | le3 | ||
EPTT Backlash P1 | arcmin | 1 | three~ten | le3 | le3 | le3 | le3 | le3 | le3 | le3 |
two | 12~a hundred | le5 | le5 | le5 | le5 | le5 | le5 | le5 | ||
StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Backlash P2 | arcmin | 1 | 3~10 | le5 | le5 | le5 | le5 | le5 | le5 | le5 |
two | 12~one hundred | le7 | le7 | le7 | le7 | le7 | le7 | le7 | ||
Torsional stiffness | Nm/arcmin | one,two | three~one hundred | three | seven | 14 | 25 | 50 | one hundred forty five | 225 |
Max.radial power F2rB sup2 | N | 1,2 | three~a hundred | 780 | one,530 | three,250 | 6,seven-hundred | 9,400 | 14,500 | fifty,000 |
MAX.aXiHu (West Lake) Dis.al power F2a1B sup2 | N | one,2 | 3~a hundred | 350 | ||||||
MAX.aXiHu (West Lake) Dis.al force F2a2B sup2 | N | one,2 | three~a hundred | 390 | ||||||
one,two | 3~a hundred | twenty,000* | ||||||||
Perform efficiency eta | % | 1 | 3~10 | ge97 | ||||||
two | twelve~a hundred | ge94 | ||||||||
Bodyweight | kg | 1 | three~10 | .five | ||||||
two | 12~a hundred | .8 | ||||||||
Working temperature | ordmC | 1,two | 3~a hundred | -ten ordmC~ ninety ordmC | ||||||
Lubrication | 1,two | 3~a hundred | Artificial lubricating oil | |||||||
Security degree | 1,two | 3~100 | IP65 | |||||||
Installation course | 1,2 | three~one hundred | Any direction | |||||||
Noise degree(n1=3000rpm) | dB | 1,2 | three~100 | le56 | le58 | le60 | le63 | le65 | le67 | le70 |
Outline DIMENSION:
Organization Check out:
HangEPTT EPTEPTTndeyi EPTT amp EPT Co., Ltd. is a subsidiary of EPTTiwan Jun Yi EPTTry. Jun Yi EPTTry was founded in March 1972. The company EPTTizes in the design and style, deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and creation of large-tech various EPTTed motors and helical EPTT EPTTs, worm and worm EPTT EPTTs and planetary EPTTs. Our goods offered to more than 30 international locations about the planet and acquire great status and several awards in the overEPTT marketplace for numerous several years. In current years, to accomplish EPTT production and offer excellent support,we established up subsidiary of production of planetary EPTT EPTT in EPTT.
Historical past:
1972:EPTTiwan Jun Yi EPTTry is started.
1989:It estabEPTTd a overEPTT department firm ATRUMP EPTTRY INC in Los Angeles
1995:Go the ISO9002 Commodity certification.
2003:Pass the ISO9001 quality certification and the European CE stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd examination which enabled the products to be marketed in Europe
2013:The business established up subsidiary in EPTT to achieve EPTT creation.
Manufacturing unit:
Knowledge Made In ATG,Knowledge The EPTT.
Products:
INSPECTION Tools:
FAQ:
(1) Can I be your agent?
Of course, welcome to deep cooperation. We have big promotion of ATG model in the market now. For the specifics you should contact me.
(two) Is OEM offered?
Indeed, OEM is obtainable. We have expert designer to support your manufacturer advertising.
(3) How can I get a sample to examine your high quality?
After price tag confirmation, you can demand for samples to verify our good quality.
(four)What's your top quality assure?
We have diverse varieties of merchandise which can satisfy diverse quality stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.
Our QC office will check goods prior to delivery. We have one hundred% top quality ensure to consumers. We will be accountable for any quality difficulty.
(5) How about the delivery time?
The shipping and delivery time is relying on the products and the amount. But EPTTly, the supply time for a container is about one thirty day period.
Welcome to our business.
If any difficulty, feel cost-free to go away message on the base of this web page.