China Right Angle Double Worm Gearboxes Combination for Transmission combined worm gearbox

Merchandise Description

 

Solution Description

Primary Resources:
one)housing:aluminium alloy ADC12(size 571-090) die cast iron HT200(dimension a hundred and ten-a hundred and fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher warmth remedy make gear surface hardness up to fifty six-sixty two HRC Following precision grinding, carburization layer's thickness in between .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-1

Thorough Photos

Combination Options:
Input:with input shaft, With sq. flange,With IEC common input flange
Output:with torque arm, output flange, one output shaft, double output shaft, plastic protect
Worm reducers are offered with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Computer, NMRV+UDL, NMRV+MOTORS

Exploded View:

Merchandise Parameters

 
Previous Model     
  New Model     Ratio     Center Distance  Electricity Input Dia.  Output Dia.    Output Torque Weight
RV571     7.5~100   25mm   .06KW~.12KW  Φ9 Φ11 21N.m  .7kgs
RV030 RW030 seven.5~a hundred 30mm   .06KW~.25KW Φ9(Φ11) Φ14 45N.m  1.2kgs
RV040 RW040 seven.5~one hundred 40mm   .09KW~.55KW Φ9(Φ11,Φ14) Φ18(Φ19) 84N.m  two.3kgs
RV050 RW050 7.5~one hundred 50mm   .12KW~1.5KW Φ11(Φ14,Φ19) Φ25(Φ24) 160N.m  3.5kgs
RV063 RW063 7.5~one hundred 63mm   .18KW~2.2KW Φ14(Φ19,Φ24) Φ25(Φ28) 230N.m  six.2kgs
RV075 RW075 7.5~one hundred 75mm   .25KW~4.0KW Φ14(Φ19,Φ24,Φ28)  Φ28(Φ35) 410N.m  9.0kgs
RV090 RW090 seven.5~one hundred 90mm   .37KW~4.0KW Φ19(Φ24,Φ28) Φ35(Φ38) 725N.m  13.0kgs
RV110 RW110 seven.5~a hundred 110mm   .55KW~7.5KW Φ19(Φ24,Φ28,Φ38)   Φ42 1050N.m  35.0kgs
RV130 RW130 7.5~one hundred 130mm   .75KW~7.5KW Φ24(Φ28,Φ38) Φ45 1550N.m  48.0kgs
RV150 RW150 7.5~100 150mm     2.2KW~15KW Φ28(Φ38,Φ42) Φ50   84.0kgs

GMRV Define Dimension:

GMRV A B C C1 D(H8) E(h8) F G G1 H H1 I M N O P Q R S T BL β b t V  
030 80 97 54 forty four 14 55 32 fifty six sixty three 65 29 fifty five 40 fifty seven thirty seventy five 44 6.5 21 5.5 M6*10(n=4) 5 16.three 27
040 100 121.5 70 sixty 18(19) 60 43 71 seventy eight 75 36.5 70 fifty seventy one.5 forty 87 55 6.five 26 six.five M6*ten(n=4) 45° 6 twenty.8(21.8) 35
050 one hundred twenty 144 eighty 70 twenty five(24) 70 forty nine eighty five 92 85 43.five eighty sixty 84 50 100 64 8.five thirty 7 M8*twelve(n=4) 45° 8 28.3(27.3) forty
063 144 174 a hundred eighty five 25(28) 80 sixty seven 103 112 ninety five fifty three 95 seventy two 102 63 one hundred ten 80 eight.five 36 8 M8*12(n=8) 45° 8 28.3(31.3) 50
075 172 205 a hundred and twenty ninety 28(35) 95 seventy two 112 120 a hundred and fifteen fifty seven 112.five 86 119 seventy five one hundred forty ninety three eleven 40 10 M8*14(n=8) 45° 8(ten) 31.3(38.3) 60
090 206 238 a hundred and forty 100 35(38) a hundred and ten 74 one hundred thirty 140 one hundred thirty sixty seven 129.five 103 135 90 one hundred sixty 102 13 forty five eleven M10*sixteen(n=8) 45° ten 38.3(41.3) 70
one hundred ten 255 295 a hundred and seventy 115 forty two a hundred thirty - a hundred and forty four a hundred and fifty five a hundred sixty five seventy four a hundred and sixty 127.5 167.5 one hundred ten two hundred 125 14 50 fourteen M10*18(n=8) 45° twelve 45.three eighty five
one hundred thirty 293 335 200 120 forty five 180 - one hundred fifty five one hundred seventy 215 81 179 146.5 187.5 130 250 one hundred forty sixteen 60 15 M12*twenty(n=8) 45° fourteen 48.eight a hundred
150 340 four hundred 240 145 50 one hundred eighty - 185 two hundred 215 ninety six 210 one hundred seventy 230 150 250 a hundred and eighty eighteen 72.five 18 M12*22(n=8) 45° fourteen 53.8  120  

 

Organization Profile

About CZPT Transmission:
We are a professional reducer maker situated in HangZhou, ZHangZhoug province.
Our leading products is  full variety of RV571-one hundred fifty worm reducers , also equipped GKM hypoid helical gearbox, GRC inline helical gearbox, Computer models, UDL Variators and AC Motors, G3 helical equipment motor.
Items are broadly utilized for programs this sort of as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-producing, development equipment, metallurgic mine, environmental safety engineering, and all types of automated strains, and assembly traces.
With rapidly supply, excellent right after-income service, innovative making facility, our merchandise promote well  both at home and overseas. We have exported our reducers to Southeast Asia, Eastern Europe and Center East and so on.Our goal is to develop and innovate on basis of high top quality, and generate a good track record for reducers.

 Packing details:Plastic Luggage+Cartons+Wood Circumstances , or on ask for
We take part Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Win Eurasia 

Logistics

After Revenue Support

one.Upkeep Time and Warranty:Within 1 calendar year after obtaining merchandise.
two.Other ProviderIncluding modeling variety information, installation guidebook, and difficulty resolution guide, etc.

FAQ

one.Q:Can you make as for each customer drawing?
   A: Of course, we offer customized support for customers accordingly. We can use customer's nameplate for gearboxes.
2.Q:What is your phrases of payment ?
   A: 30% deposit ahead of production,balance T/T just before supply.
three.Q:Are you a trading business or manufacturer?
   A:We are a manufacurer with innovative tools and experienced staff.
four.Q:What is actually your manufacturing potential?
   A:8000-9000 PCS/Thirty day period
five.Q:Free of charge sample is obtainable or not?
   A:Yes, we can offer free of charge sample if buyer concur to pay for the courier cost
6.Q:Do you have any certification?
   A:Indeed, we have CE certification and SGS certification report.

Get in touch with data:
Ms Lingel Pan
For any concerns just feel totally free ton make contact with me. Several thanks for your type focus to our company!


/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Right Angle
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

Is a worm gear reducer gearbox right for your application?

If you're interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you've come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let's take a closer look.
worm reducer

This is a reducer gearbox

Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it's important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.

pocket

Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they're easy to maintain, which means they're an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
worm reducer

It is high efficiency

When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.

It has a low clearance

Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
worm reducer

It has a high torque to weight ratio

The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.

China Right Angle Double Worm Gearboxes Combination for Transmission     combined worm gearboxChina Right Angle Double Worm Gearboxes Combination for Transmission     combined worm gearbox
editor by CX 2023-04-19