China manufacturer Flexible Installation Hydraulic Nmrv Series Speed Reducer Worm Gearbox for Belt Transportation differential gearbox

Product Description

 

High Rpm RV series Aluminum Alloy Worm Gear box NMRV 571-150 Reducer Variable Wheel Drive Speed Reduction Worm Gearbox

Product Parameters

Specification

Type

Worm Gearbox/Worm Gear Speed Reducer

Model

NMRV:571,030,040,050,063,075,090,110,130,150

Center distance

25-150mm

Ratio

5,7.5,10,15,20,25,30,40,50,60,80,100

Torque

1.8-1800Nm

Motor

2 pole, 4 pole, 6 pole

Mounting position

Omnidirectional

Color

Blue/Silver grey Or On request

Material

NMRV571~090:Aluminum alloy; NMRV110~150 Cast iron

Details

Multiple inputs and outputs

Feature
1. Mad of high-quality aluminum alloy,light weight and non-rusting
2. Large output torque
3. Smooth in running and low in noise,can work long time in dreadful conditions.
4. High in radiating efficiency.
5. Good-looking in appearance,durable in service life and small in volume.
6. Suitable for omnibearing installation.

contact-info.html
 

Model

NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150 

Ratio

5,7.5,10,15,20,25,30,40,50,60,80,100

Output Torque

1.8-1760Nm

Application

Machinery Industry

Input Speed

900-2800RPM

Output Speed

10-250RPM

Material

Housing: Size 25-110 Is Aluminum Alloy, Size 110-150 Is Cast-Iron

Worm Wheel: ZCuSn10Pb1

Worm:20Cr

Pinion:Tin Bronze

Output Shaft: Steel-45#

IEC Flange

IEC Standard Flange Or On Customer Request

Detailed Photos

Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Expansion
Gear Shape: Bevel Gear
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

nmrv gearbox

Safety Precautions When Working with NMRV Gearboxes

Working with NMRV (worm gear) gearboxes requires careful attention to safety to prevent accidents and injuries. Here are some essential safety precautions to consider:

  • Personal Protective Equipment (PPE): Always wear appropriate PPE, such as gloves, safety glasses, and protective clothing, to protect yourself from potential hazards.
  • Lockout-Tagout: Before performing any maintenance or repairs, ensure the equipment is properly shut down and locked out to prevent accidental startup.
  • Training: Only qualified personnel with proper training and experience should work on NMRV gearboxes to minimize the risk of errors and accidents.
  • Proper Tools: Use the correct tools for the job and ensure they are in good condition. Incorrect tools can cause damage or pose safety risks.
  • Adequate Lighting: Work in well-lit areas to enhance visibility and reduce the risk of accidents caused by poor lighting.
  • Secure Work Area: Ensure the work area is clean, organized, and free from clutter to prevent tripping hazards and improve overall safety.
  • Lubrication: When applying lubricants, be cautious to avoid spills. Clean up any spills immediately to prevent slips and falls.
  • Follow Manufacturer Guidelines: Adhere to the manufacturer's instructions, maintenance schedules, and safety guidelines when working on NMRV gearboxes.
  • Electrical Safety: If the gearbox is electrically powered, ensure proper electrical safety protocols are followed during maintenance or repairs.
  • Avoid Overloading: Do not exceed the recommended load capacities of the gearbox to prevent mechanical failures and potential hazards.
  • Stay Clear of Moving Parts: Keep hands, clothing, and other objects away from moving parts to prevent entanglement or injury.
  • Emergency Procedures: Be familiar with emergency shutdown procedures and know how to respond in case of an unexpected situation.

By following these safety precautions, you can help ensure a safe working environment and minimize the risk of accidents or injuries when working with NMRV gearboxes.

nmrv gearbox

Maintenance and Service of an NMRV Gearbox

Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:

  • Lubrication: Regularly lubricate the gearbox as per the manufacturer's recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
  • Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
  • Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
  • Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
  • Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
  • Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
  • Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
  • Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.

By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.

nmrv gearbox

Installing an NMRV Gearbox

Installing an NMRV gearbox requires careful attention to ensure proper alignment and secure attachment. Here's a general guide to the installation process:

  1. Prepare the Workspace: Ensure you have a clean and organized workspace with the necessary tools and equipment.
  2. Positioning: Place the NMRV gearbox in the desired position on your machinery, making sure it aligns with the input and output components.
  3. Alignment: Ensure that the input shaft of the gearbox is aligned with the driving shaft from the power source. Misalignment can lead to premature wear and reduced efficiency.
  4. Mounting: Securely mount the NMRV gearbox to the machinery frame using appropriate fasteners. Follow the manufacturer's recommendations for torque specifications.
  5. Input Coupling: Connect the input shaft of the gearbox to the driving shaft using a suitable coupling. This coupling should be properly aligned to avoid unnecessary stress on the gearbox components.
  6. Output Coupling: Similarly, connect the output shaft of the gearbox to the driven component using an appropriate coupling.
  7. Lubrication: Before operation, make sure to fill the gearbox with the recommended lubricant to ensure proper gear meshing and reduce friction.
  8. Testing: Run the machinery briefly to check for any unusual noises, vibrations, or leaks. Make any necessary adjustments.

It's crucial to follow the manufacturer's installation guidelines and specifications to ensure a smooth and trouble-free installation process. Proper installation contributes to the longevity and reliable performance of your NMRV gearbox.

China manufacturer Flexible Installation Hydraulic Nmrv Series Speed Reducer Worm Gearbox for Belt Transportation   differential gearbox	China manufacturer Flexible Installation Hydraulic Nmrv Series Speed Reducer Worm Gearbox for Belt Transportation   differential gearbox
editor by CX 2023-09-25